4s 40a bms Lithium Battery Protection Board for 3.7V NMC cells
Specifications
- Short circuit protection
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Overcharge Voltage per cell: 4.2V
- Maximum Working Current: 40A
Original price was: ₹164.₹159Current price is: ₹159.
4s 40a bms Lithium Battery Protection Board for 3.7V NMC cells
Step into advanced energy management with the 4s 40a bms Lithium Battery Protection Board tailored for 3.7V NMC cells. Seamlessly integrating into your power system, this board ensures optimal safety and efficiency. With a robust 40A capacity, it guards against overcharging, over-discharging, and short circuits, prioritizing the longevity of your battery. Transitioning smoothly between various operational phases, this protection board optimizes the overall performance of your 3.7V NMC cell configuration. Whether for DIY projects or professional applications, the 4S 40A BMS offers a reliable and secure solution for powering your devices. Elevate your energy storage capabilities with this advanced Lithium Battery Protection Board, a must-have for those prioritizing safety and efficiency.
Lithium-ion batteries are lightweight and have a high energy density, but if misused—that is, if you overcharge, undercharge, or use more current than the battery can handle—they can explode, causing damage to the surrounding area or possibly even endangering nearby humans. You ought to use your batteries with a protection board to avoid this.
By monitoring the voltage and current entering and leaving the battery pack, this 4S 40A Lithium-ion Battery Protection Board monitor safeguards three series-connected cells. Should any dangerous condition arise, it will cut off the battery from the load or the charger. This can be used for any do-it-yourself project that requires low current, such as robotics applications, 3D printers, quadcopters, Arduino or Raspberry Pi-based projects, etc. You can also use it with slightly higher currents because it can handle currents up to 40 A.This board can provide a maximum voltage of 16.8V and a nominal voltage of roughly 14V because it is compatible with 18650 cells that have a nominal voltage of 3.6V or 3.7V.
Specifications
- Short circuit protection
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Overcharge Voltage per cell: 4.2V
- Maximum Working Current: 40A
Checkout our other rechargeable batteries :- 18650 battery , LIFEPO4 battery , Li-po battery.
You may also like…
Li ion Battery Applications :
- Grade: Solar & EV Grade
- Lightweight | 2200 mAh | Original Rechargeable Battery ,
- They operate at low resistance, so they consequently charge fast.
- 10+ years lithium ion battery life
- Premium Quality lithium ion
- Environmentally friendly
- Low self-discharge and low maintenance
- Constant output power
146 in stock
Related Products…
Features and Specifications:
- Battery discharging stop voltage: 2.9V.
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
- Preset 4.2V charging voltage, precision ±1%.
- Max 8uA standby current.
- Integration charging management and discharging management.
63 in stock
84 in stock
Specifications
- High tensile strength to increase durability
- Low resistivity to decrease heat loss
- Easily soldered on terminals
- Ductile and can be molded into any shape.
86 in stock
Applications of NiMH AAA 700mAh Rechargeable :
- Type: Ni-Mh Button top Battery
- Battery Size: AAA
- Power Output: 1.2v DC
- Rechargeable: Yes
- Compatible Devices: Remote, Camera, Toy, Torch
- Product Dimensions: 43mmx8mm (Height x Diameter)
- low self discharge
- lead acid batteries
79 in stock
Applications of 3 Section 18650 Battery Support Bracket
- Easy and Convenient to use
- Cheap and robust
- Can be easily replaced
- Improves the safety and reliability of battery pack
- Light weight brackets so does not add too much weight to the battery pack.
- Enhancing Performance with Lithium Ion Technology
39 in stock
Specifications
- Constant 9V Output till lasts
- Metal Jacket Body
- Good Built Quality and hence Leakproof
- Easy to install and Replace
- Corrosion free Connector Point for long-term use
- 0% Mercury and Cadmium. Environment-friendly
- OEM Compatible.
80 in stock
Specifications
- Battery Pack Output 12.8V (4S Type)
- This BMS only Used For LifePO4, not For Lithium-Ion Batteries
- Deep Discharge & Over Charging Protection
- Battery Capacity- 10A
- Voltage 12.8v
- Size Prismatic
- Battery Type-Lithium Iron Phosphate
- Usage/Application-Solar Light
- Current 10 Amp
75 in stock
Applications of 3-Series 18650 Lithium Battery :
- Nominal Voltage: Compatible with 3.6V and 3.7V lithium batteries, including 18650, 26650, and polymer lithium batteries.
- Charging Voltage Range: Offers flexibility with a charging voltage range between 16.8V and 18.1V.
- Continuous Charge Current (Upper Limit): Supports a maximum continuous charge current of 20 A.
- Balanced Version: Ideal for applications with starting currents below 80A and power requirements up to 135W (perfect for drills with balance).
-
Lithium Ion v Lithium Polymer
96 in stock
Specifications
- Short circuit protection
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Overcharge Voltage: 4.2V
- Maximum Working Current: 20A
47 in stock
APPLICATIONS of 18650 lithium ion 1200mAh :
<p><p><p><ul>
-
-
- Cordless Phones
<
-
li>Small DRONES</
-
- li></li>
- Tablet
- PC GPS<
- /li>
- iPod, DVD, MP4 Player, etc.</li>
- Mobiles backup power supply/Power bank</li>
- </p>
- Effective Battery Charging
- Versatility Across Different Kinds of Batteries
77 in stock
Specifications
- Battery Compatibility: Designed for use with 3.7V NMC (Nickel Manganese Cobalt) lithium cells.
- Protection Features: Offers comprehensive protection, including overcharge protection, over-discharge protection, and short-circuit protection.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 10 A.
- Nickel Strip: Includes a nickel strip for easy and secure installation.
100 in stock
Specifications
- Battery Configuration: Designed for 3 series-connected lithium-ion cells (3S).
- Nominal Voltage: 11.1V nominal voltage when using 3.7V NMC cells.
- Maximum Discharge Current: Capable of handling a maximum discharge current of 15 amperes.
- Nickel Strip Inclusion: Comes with a nickel strip for secure battery pack assembly.
- Protection Features: Includes overcharge and over-discharge protection to safeguard individual cells.
- Cell Balancing: Equipped with a balancing function to maintain uniform cell states of charge
49 in stock
Reviews
There are no reviews yet.