EGPT
IR Sensor Module – LM393 Photoelectric Sensor Module
Specifications
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
Original price was: ₹93.₹34Current price is: ₹34. (inc. GST)
IR sensor module lm393 is a sensor module which you can use to identify the distance between obstacles, identifying changes in surroundings etc. applications. It has an IR transmitter, IR Receiver, LM393 and a potentiometer to set a threshold for digital output. When light brightness of ambient is less than the set threshold, DO-side output is high, when light brightness of ambient is over the threshold, DO-ended output is low. This module can be used in obstacle detection in autonomous robots and cars, in positional feedback for control system, industrial safety system, Wheel encoder etc.
Specifications
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
Product Description
In order to use this module, you have to power the module via VCC and GND pin from 5V and GND pins respectively of your microcontroller board. It is a digital output sensor so it cant be used to measure the distance of object from the sensor module but you can detect the object in the adjustable sensing range. Connect the Digital Output pin to any GPIO pin your microcontroller board like Arduino or Raspberry Pi etc.
Additional Resources
Obstacle Avoiding Robot using PIC Microcontroller
Package Contents
1×IR LM393 Photoelectric Sensor Module
“
You may also like…
Original price was: ₹106.₹70Current price is: ₹70. (inc. GST)
Add to cart96 in stock
Original price was: ₹201.₹58Current price is: ₹58. (inc. GST)
Dual Shaft DC Geared Motor (300RPM) Applications:
- Robotics
- Automation
- In various Vehicle
- Toys
- Different gear movement related operations
70 in stock
Original price was: ₹589.₹301Current price is: ₹301. (inc. GST)
Applications of Arduino Nano :
- It has 22 I/O pins in total in which 14 are Digital (6 are PWM output) and 8 are Analog pins.
- Operating Voltage (Logic Level): 5V.
- Supports Serial, I2C, SPI Communication Protocols.
- Flash memory: 32KB in which 2KB is used by Bootloader
- Clock speed: 16MHz
- DC Current per I/O Pin: 40 mA
- SRAM : 2KB, EEPROM: 1KB
- DC Current per I/O pin: 40mA
82 in stock
Related Products…
Original price was: ₹24.₹7Current price is: ₹7. (inc. GST)
Applications of NTC Thermistor:
- Resistance at 25 degrees C: 10K +- 1%
- B-value (material constant) = 3950+- 1%
- Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air) approx.7.5mW/K
- Thermal cooling time constant <= (in air) 20 seconds
- Come with broad resistance range
- Provided with lacquer-coated thermistor disk
- Thermistors
- Resistance Temperature Device (RTD):
99 in stock
₹165 (inc. GST)
Features:
– Power-Supply: 12V DC.
– Sensor Cable Length: 0.5 meters.
– LED Indicator: Illustrates the current relay state.
– Compact Size: 48mm x 40mm x 14mm in dimension and have a weight of 20g.
– Relay Capacity: The transformer can handle 240V AC, 5A or 14V DC, 10A.
50 in stock
₹22 (inc. GST)
TP4056 Module Specifications:
- Input voltage : 4.5V ~ 5.5V
- A full charge voltage: 4.2V
- Power: 4.2 w
- Charging accuracy: 1.5%
- Charging indicator: micro LED
- Input Interface: Micro USB port
- Charging method: linear charge
- Operating Temperature: -10 to +85ºC
2 in stock
₹6 (inc. GST)
Applications of Single Section 18650 Lithium Battery Support Bracket :
- Easy and Convenient to use
- Cheap and robust
- Can be easily replaced
- Improves the safety and reliability of battery pack
- Light weight brackets so does not add too much weight to the battery pack.
- Series Battery Connector for Stability
- Optimized Battery Connection Series
100 in stock
Original price was: ₹194.₹188Current price is: ₹188. (inc. GST)
Specifications
- Short circuit protection
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Overcharge Voltage per cell: 4.2V
- Maximum Working Current: 40A
95 in stock
Original price was: ₹106.₹34Current price is: ₹34. (inc. GST)
Features and Specifications:
- Battery discharging stop voltage: 2.9V.
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
- Preset 4.2V charging voltage, precision ±1%.
- Max 8uA standby current.
- Integration charging management and discharging management.
61 in stock
₹46 (inc. GST)
Specifications
- Input/Trigger voltage: 5V
- Current consumption: 20mA maximum
- AC load voltage: upto 250V
- DC load voltage: upto 30V
- Load current: upto 10A
- Status Indicator LEDs
92 in stock
₹117 (inc. GST)
Specifications
- Working Current: 3A
- Maximum Peak Current: 6A
- Overcharge Voltage Range: 4.25-4.35V per cell
- Over-Discharge Voltage: 2.3-3.0V
- Quiescent Current: <30µA
98 in stock
Original price was: ₹117.₹78Current price is: ₹78. (inc. GST)
- Supply Voltage: 5V
- Output: 3.3V TTL Logic
- Infrared Sensor with Control Circuit Board
- Adjustable Sensitivity and Holding Time
- Coverage: 120° and 7m range
- Low power consumption: 65mA
- Temperature Range: -20°C to 80°C
42 in stock
Original price was: ₹106.₹51Current price is: ₹51. (inc. GST)
Specifications
- Input Voltage Range: 3VDC to 24VDC
- Efficiency upto 93%
- Output Voltage Range: 5VDC to 26 VDC
- Inexpensive and provide high current
- Simple to adjust the output Voltage
- Maximum Output current 2A
76 in stock
₹235 (inc. GST)
Specifications
- Battery Compatibility: Designed for use with 3.7V NMC (Nickel Manganese Cobalt) lithium cells.
- Protection Features: Offers comprehensive protection, including overcharge protection, over-discharge protection, and short-circuit protection.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 10 A.
- Nickel Strip: Includes a nickel strip for easy and secure installation.
100 in stock
Reviews
There are no reviews yet.