EGPT
4s 40a bms Lithium Battery Protection Board for 3.7V NMC cells
Original price was: ₹194.₹188Current price is: ₹188. (inc. GST)
Specifications
- Short circuit protection
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Overcharge Voltage per cell: 4.2V
- Maximum Working Current: 40A
4s 40a bms Lithium Battery Protection Board for 3.7V NMC cells
Step into advanced energy management with the 4s 40a bms Lithium Battery Protection Board tailored for 3.7V NMC cells. Seamlessly integrating into your power system, this board ensures optimal safety and efficiency. With a robust 40A capacity, it guards against overcharging, over-discharging, and short circuits, prioritizing the longevity of your battery. Transitioning smoothly between various operational phases, this protection board optimizes the overall performance of your 3.7V NMC cell configuration. Whether for DIY projects or professional applications, the 4S 40A BMS offers a reliable and secure solution for powering your devices. Elevate your energy storage capabilities with this advanced Lithium Battery Protection Board, a must-have for those prioritizing safety and efficiency.
Lithium-ion batteries are lightweight and have a high energy density, but if misused—that is, if you overcharge, undercharge, or use more current than the battery can handle—they can explode, causing damage to the surrounding area or possibly even endangering nearby humans. You ought to use your batteries with a protection board to avoid this.
By monitoring the voltage and current entering and leaving the battery pack, this 4S 40A Lithium-ion Battery Protection Board monitor safeguards three series-connected cells. Should any dangerous condition arise, it will cut off the battery from the load or the charger. This can be used for any do-it-yourself project that requires low current, such as robotics applications, 3D printers, quadcopters, Arduino or Raspberry Pi-based projects, etc. You can also use it with slightly higher currents because it can handle currents up to 40 A.This board can provide a maximum voltage of 16.8V and a nominal voltage of roughly 14V because it is compatible with 18650 cells that have a nominal voltage of 3.6V or 3.7V.
Specifications
- Short circuit protection
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Overcharge Voltage per cell: 4.2V
- Maximum Working Current: 40A
Checkout our other rechargeable batteries :- 18650 battery , LIFEPO4 battery , Li-po battery.
You may also like…
Original price was: ₹224.₹89Current price is: ₹89. (inc. GST)
Li ion Battery Applications :
- Grade: Solar & EV Grade
- Lightweight | 2200 mAh | Original Rechargeable Battery ,
- They operate at low resistance, so they consequently charge fast.
- 10+ years lithium ion battery life
- Premium Quality lithium ion
- Environmentally friendly
- Low self-discharge and low maintenance
- Constant output power
131 in stock
Related Products
₹22 (inc. GST)
TP4056 Module Specifications:
- Input voltage : 4.5V ~ 5.5V
- A full charge voltage: 4.2V
- Power: 4.2 w
- Charging accuracy: 1.5%
- Charging indicator: micro LED
- Input Interface: Micro USB port
- Charging method: linear charge
- Operating Temperature: -10 to +85ºC
2 in stock
Original price was: ₹212.₹70Current price is: ₹70. (inc. GST)
Applications of Li-ion Rechargeable Battery :
- Grade: A | used in TV Remote, wall clocks
- Lightweight | 600 mAh | Original Battery
- They operate at low resistance, so they consequently charge fast.
- 10+ years Battery life
- Premium Quality
- Size – AA | 14500 battery
- Low self-discharge and low maintenance
- certification – CE
- Low Self Discharge
60 in stock
₹6 (inc. GST)
Applications of Single Section 18650 Lithium Battery Support Bracket :
- Easy and Convenient to use
- Cheap and robust
- Can be easily replaced
- Improves the safety and reliability of battery pack
- Light weight brackets so does not add too much weight to the battery pack.
- Series Battery Connector for Stability
- Optimized Battery Connection Series
100 in stock
₹46 (inc. GST)
Specifications
- Input/Trigger voltage: 5V
- Current consumption: 20mA maximum
- AC load voltage: upto 250V
- DC load voltage: upto 30V
- Load current: upto 10A
- Status Indicator LEDs
92 in stock
₹9 (inc. GST)
A3144 Hall Sensor Specifications and Features:
- Power Consumption of 3.5mA at VCC = 5V for Energy Efficiency
- Miniature Construction
- Single Current Sourcing Output
- Linear Output for Circuit Design Flexibility
- Low Noise Output Virtually Eliminates the Need for Filtering
- A Stable and Accurate Output
- Temperature Range of -40°C to +85°C
- Responds to Either Positive or Negative Gauss
Out of stock
Original price was: ₹590.₹353Current price is: ₹353. (inc. GST)
Applications of 32650/32700 Li-ion Lithium Battery :
- Grade: Solar & EV Grade
- Lightweight | 6000 mAh | Original Battery
- They operate at low resistance, so they consequently charge fast.
- 10+ years Battery life
- Premium Quality
- Environmentally friendly
- Low self-discharge and low maintenance
- Constant output power
- Li Lion
- Liion
- Lithium Ion Battery Suppliers
92 in stock
₹107 (inc. GST)
Applications of 18650 Li-ion 1800mAh Rechargeable :
- Grade: Solar & EV Grade
- Lightweight | 1800 mAh | Original Battery
- They operate at low resistance, so they consequently charge fast.
- 10+ years Battery life
- Premium Quality
- Environmentally friendly
- Low self-discharge and low maintenance
- Constant output power
- fast Battery Charging
86 in stock
Original price was: ₹260.₹235Current price is: ₹235. (inc. GST)
Specifications
- Battery Pack Output 12.8V (4S Type)
- This BMS only Used For LifePO4, not For Lithium-Ion Batteries
- Deep Discharge & Over Charging Protection
- Battery Capacity- 10A
- Voltage 12.8v
- Size Prismatic
- Battery Type-Lithium Iron Phosphate
- Usage/Application-Solar Light
- Current 10 Amp
74 in stock
₹294 (inc. GST)
Specifications
- Battery Configuration: Designed for 3 series-connected lithium-ion cells (3S).
- Nominal Voltage: 11.1V nominal voltage when using 3.7V NMC cells.
- Maximum Discharge Current: Capable of handling a maximum discharge current of 15 amperes.
- Nickel Strip Inclusion: Comes with a nickel strip for secure battery pack assembly.
- Protection Features: Includes overcharge and over-discharge protection to safeguard individual cells.
- Cell Balancing: Equipped with a balancing function to maintain uniform cell states of charge
49 in stock
₹117 (inc. GST)
Specifications
- Working Current: 3A
- Maximum Peak Current: 6A
- Overcharge Voltage Range: 4.25-4.35V per cell
- Over-Discharge Voltage: 2.3-3.0V
- Quiescent Current: <30µA
98 in stock
Original price was: ₹18.₹8Current price is: ₹8. (inc. GST)
Specifications of 9V Battery Snap Connector
- Connects to a 9V DC Battery
- Contacts : Brass, Nickel Plate
- Easy to connect and solder on boards
- PVC insulated, Safe
- Has two terminals, the black and red wire
- High Quality Product
84 in stock
Original price was: ₹106.₹34Current price is: ₹34. (inc. GST)
Features and Specifications:
- Battery discharging stop voltage: 2.9V.
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
- Preset 4.2V charging voltage, precision ±1%.
- Max 8uA standby current.
- Integration charging management and discharging management.
56 in stock
Reviews
There are no reviews yet.