A3144 Hall Effect Sensor
A3144 Hall Sensor Specifications and Features:
- Power Consumption of 3.5mA at VCC = 5V for Energy Efficiency
- Miniature Construction
- Single Current Sourcing Output
- Linear Output for Circuit Design Flexibility
- Low Noise Output Virtually Eliminates the Need for Filtering
- A Stable and Accurate Output
- Temperature Range of -40°C to +85°C
- Responds to Either Positive or Negative Gauss
₹8
A3144Â is a small, versatile, linear unipolar hall-effect sensor that acts as a magnetic switch. This hall effect sensor is just like switch but more sensitive to magnetic flux and suitable for harsh environment because of semiconductor type casing and no glass encapsulation. This type of unipolar hall effect sensor changes its state if one pole of magnet comes near it. This is ideal for commercial, consumer and industrial applications.
A3144 Hall Sensor Specifications and Features:
- Power Consumption of 3.5mA at VCC = 5V for Energy Efficiency
- Miniature Construction
- Single Current Sourcing Output
- Linear Output for Circuit Design Flexibility
- Low Noise Output Virtually Eliminates the Need for Filtering
- A Stable and Accurate Output
- Temperature Range of -40°C to +85°C
- Responds to Either Positive or Negative Gauss
Package Includes:
1 x A3144 Hall Effect Sensor
Related Products…
Specifications
- Small, cheap and reliable.
- Digital output
- Easy to integrate
- Operating voltage 3.3 to 5V
23 in stock
Specifications
- Battery Compatibility: Designed for 4S LiFePO4 batteries with a nominal voltage of 12.8V.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 20 A.
- Balancing: Equipped with a balancing function to ensure all cells in the battery pack maintain the same voltage, optimizing performance and longevity.
- Safety Features: Offers overcharge protection, over-discharge protection, and short-circuit protection to safeguard the battery pack.
94 in stock
Specifications
- Working Current: 3A
- Maximum Peak Current: 6A
- Overcharge Voltage Range: 4.25-4.35V per cell
- Over-Discharge Voltage: 2.3-3.0V
- Quiescent Current: <30µA
98 in stock
Specifications
- Battery Pack Output 12.8V (4S Type)
- This BMS only Used For LifePO4, not For Lithium-Ion Batteries
- Deep Discharge & Over Charging Protection
- Battery Capacity- 10A
- Voltage 12.8v
- Size Prismatic
- Battery Type-Lithium Iron Phosphate
- Usage/Application-Solar Light
- Current 10 Amp
75 in stock
Specifications
- Battery Compatibility: Designed for use with 3.7V NMC (Nickel Manganese Cobalt) lithium cells.
- Protection Features: Offers comprehensive protection, including overcharge protection, over-discharge protection, and short-circuit protection.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 10 A.
- Nickel Strip: Includes a nickel strip for easy and secure installation.
100 in stock
Specifications
- Battery Configuration: Designed for 3 series-connected lithium-ion cells (3S).
- Nominal Voltage: 11.1V nominal voltage when using 3.7V NMC cells.
- Maximum Discharge Current: Capable of handling a maximum discharge current of 15 amperes.
- Nickel Strip Inclusion: Comes with a nickel strip for secure battery pack assembly.
- Protection Features: Includes overcharge and over-discharge protection to safeguard individual cells.
- Cell Balancing: Equipped with a balancing function to maintain uniform cell states of charge
49 in stock
Specifications
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
52 in stock
- Supply Voltage: 5V
- Output: 3.3V TTL Logic
- Infrared Sensor with Control Circuit Board
- Adjustable Sensitivity and Holding Time
- Coverage: 120° and 7m range
- Low power consumption: 65mA
- Temperature Range: -20°C to 80°C
42 in stock
84 in stock
Features and Specifications:
- Battery discharging stop voltage: 2.9V.
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
- Preset 4.2V charging voltage, precision ±1%.
- Max 8uA standby current.
- Integration charging management and discharging management.
63 in stock
Specifications
- Input/Trigger voltage: 5V
- Current consumption: 20mA maximum
- AC load voltage: upto 250V
- DC load voltage: upto 30V
- Load current: upto 10A
- Status Indicator LEDs
94 in stock
Reviews
There are no reviews yet.