A3144 Hall Effect Sensor
₹9 (inc. GST)
A3144 Hall Sensor Specifications and Features:
- Power Consumption of 3.5mA at VCC = 5V for Energy Efficiency
- Miniature Construction
- Single Current Sourcing Output
- Linear Output for Circuit Design Flexibility
- Low Noise Output Virtually Eliminates the Need for Filtering
- A Stable and Accurate Output
- Temperature Range of -40°C to +85°C
- Responds to Either Positive or Negative Gauss
Out of stock
A3144Â is a small, versatile, linear unipolar hall-effect sensor that acts as a magnetic switch. This hall effect sensor is just like switch but more sensitive to magnetic flux and suitable for harsh environment because of semiconductor type casing and no glass encapsulation. This type of unipolar hall effect sensor changes its state if one pole of magnet comes near it. This is ideal for commercial, consumer and industrial applications.
A3144 Hall Sensor Specifications and Features:
- Power Consumption of 3.5mA at VCC = 5V for Energy Efficiency
- Miniature Construction
- Single Current Sourcing Output
- Linear Output for Circuit Design Flexibility
- Low Noise Output Virtually Eliminates the Need for Filtering
- A Stable and Accurate Output
- Temperature Range of -40°C to +85°C
- Responds to Either Positive or Negative Gauss
Package Includes:
1 x A3144 Hall Effect Sensor
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
- 5mm LED
- 18650 Lithium Battery
- arduino
- arduino ide
- arduino uno
- Batteries
- Battery
- Battery Accessories
- Battery Charging
- bo motor
- Capacitor
- Capacitors
- development board
- diode emitting light
- drone
- drone propellers
- drone spare parts
- LED
- LEDs
- Li-ion Battery
- light emitting diode
- li on li po
- li po and li ion
- lithium battery
- lithium ion
- lithium ion battery life
- Module
- NMC Cells (18540)
- non- Rechargeable Battery
- original
- Passives/Capacitors
- Passives/Diodes
- Passives/Resistors
- power
- quadcoptor
- rc drone
- Rechargeable
- Rechargeable Battery
- Resistor
- RGB
- robo
- sensor
- Sensors
- type of leds
- types of led lights
Related Products
₹260 Original price was: ₹260.₹235Current price is: ₹235. (inc. GST)
Specifications
- Battery Pack Output 12.8V (4S Type)
- This BMS only Used For LifePO4, not For Lithium-Ion Batteries
- Deep Discharge & Over Charging Protection
- Battery Capacity- 10A
- Voltage 12.8v
- Size Prismatic
- Battery Type-Lithium Iron Phosphate
- Usage/Application-Solar Light
- Current 10 Amp
74 in stock
₹235 (inc. GST)
Specifications
- Battery Compatibility: Designed for use with 3.7V NMC (Nickel Manganese Cobalt) lithium cells.
- Protection Features: Offers comprehensive protection, including overcharge protection, over-discharge protection, and short-circuit protection.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 10 A.
- Nickel Strip: Includes a nickel strip for easy and secure installation.
100 in stock
₹24 Original price was: ₹24.₹7Current price is: ₹7. (inc. GST)
Applications of NTC Thermistor:
- Resistance at 25 degrees C: 10K +- 1%
- B-value (material constant) = 3950+- 1%
- Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air) approx.7.5mW/K
- Thermal cooling time constant <= (in air) 20 seconds
- Come with broad resistance range
- Provided with lacquer-coated thermistor disk
- Thermistors
- Resistance Temperature Device (RTD):
99 in stock
₹165 (inc. GST)
Features:
– Power-Supply: 12V DC.
– Sensor Cable Length: 0.5 meters.
– LED Indicator: Illustrates the current relay state.
– Compact Size: 48mm x 40mm x 14mm in dimension and have a weight of 20g.
– Relay Capacity: The transformer can handle 240V AC, 5A or 14V DC, 10A.
50 in stock
₹164 (inc. GST)
Specifications
- Model : HX-4S-A01
- Size : 72mm*17mm*3mm
- Upper limit working current : 4A~6A
- Upper limit instantaneous current : 10A~13A
- Static Current :Â Less than 30uA
- Overcharge Voltage Range : 4.25v~4.35±0.05v
- Overdischarge voltage range : 2.3V~3.0v±0.05v
- Working temperature : -40~+60℃
99 in stock
₹106 Original price was: ₹106.₹34Current price is: ₹34. (inc. GST)
Features and Specifications:
- Battery discharging stop voltage: 2.9V.
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
- Preset 4.2V charging voltage, precision ±1%.
- Max 8uA standby current.
- Integration charging management and discharging management.
53 in stock
₹93 Original price was: ₹93.₹34Current price is: ₹34. (inc. GST)
Specifications
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
51 in stock
₹194 Original price was: ₹194.₹188Current price is: ₹188. (inc. GST)
Specifications
- Short circuit protection
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Overcharge Voltage per cell: 4.2V
- Maximum Working Current: 40A
94 in stock
₹117 Original price was: ₹117.₹78Current price is: ₹78. (inc. GST)
- Supply Voltage: 5V
- Output: 3.3V TTL Logic
- Infrared Sensor with Control Circuit Board
- Adjustable Sensitivity and Holding Time
- Coverage: 120° and 7m range
- Low power consumption: 65mA
- Temperature Range: -20°C to 80°C
42 in stock
₹9 (inc. GST)
Applications of 2 Section 18650 Battery Support Bracket :
- Simple and handy to use
- Low-cost and sturdy
- Easily replaceable
- enhances the battery pack’s dependability and safety
- Lightweight brackets prevent the battery pack from becoming excessively heavy.
- Optimized Battery Connection Series
- Series Battery Connector for Stability
95 in stock
₹117 (inc. GST)
Specifications
- Working Current: 3A
- Maximum Peak Current: 6A
- Overcharge Voltage Range: 4.25-4.35V per cell
- Over-Discharge Voltage: 2.3-3.0V
- Quiescent Current: <30µA
98 in stock
Reviews
There are no reviews yet.