A3144 Hall Effect Sensor
₹9 (inc. GST)
A3144 Hall Sensor Specifications and Features:
- Power Consumption of 3.5mA at VCC = 5V for Energy Efficiency
- Miniature Construction
- Single Current Sourcing Output
- Linear Output for Circuit Design Flexibility
- Low Noise Output Virtually Eliminates the Need for Filtering
- A Stable and Accurate Output
- Temperature Range of -40°C to +85°C
- Responds to Either Positive or Negative Gauss
Out of stock
A3144Â is a small, versatile, linear unipolar hall-effect sensor that acts as a magnetic switch. This hall effect sensor is just like switch but more sensitive to magnetic flux and suitable for harsh environment because of semiconductor type casing and no glass encapsulation. This type of unipolar hall effect sensor changes its state if one pole of magnet comes near it. This is ideal for commercial, consumer and industrial applications.
A3144 Hall Sensor Specifications and Features:
- Power Consumption of 3.5mA at VCC = 5V for Energy Efficiency
- Miniature Construction
- Single Current Sourcing Output
- Linear Output for Circuit Design Flexibility
- Low Noise Output Virtually Eliminates the Need for Filtering
- A Stable and Accurate Output
- Temperature Range of -40°C to +85°C
- Responds to Either Positive or Negative Gauss
Package Includes:
1 x A3144 Hall Effect Sensor
5 |
|
0 |
4 |
|
0 |
3 |
|
0 |
2 |
|
0 |
1 |
|
0 |
- 5mm LED
- 18650 Lithium Battery
- arduino
- arduino ide
- arduino uno
- Batteries
- Battery
- Battery Accessories
- Battery Charging
- bo motor
- Capacitor
- Capacitors
- development board
- diode emitting light
- drone
- drone propellers
- drone spare parts
- LED
- LEDs
- Li-ion Battery
- light emitting diode
- li on li po
- li po and li ion
- lithium battery
- lithium ion
- lithium ion battery life
- Module
- NMC Cells (18540)
- non- Rechargeable Battery
- original
- Passives/Capacitors
- Passives/Diodes
- Passives/Resistors
- power
- quadcoptor
- rc drone
- Rechargeable
- Rechargeable Battery
- Resistor
- RGB
- robo
- sensor
- Sensors
- type of leds
- types of led lights
Related Products
₹106 Original price was: ₹106.₹51Current price is: ₹51. (inc. GST)
Specifications
- Input Voltage Range: 3VDC to 24VDC
- Efficiency upto 93%
- Output Voltage Range: 5VDC to 26 VDC
- Inexpensive and provide high current
- Simple to adjust the output Voltage
- Maximum Output current 2A
76 in stock
₹24 Original price was: ₹24.₹7Current price is: ₹7. (inc. GST)
Applications of NTC Thermistor:
- Resistance at 25 degrees C: 10K +- 1%
- B-value (material constant) = 3950+- 1%
- Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air) approx.7.5mW/K
- Thermal cooling time constant <= (in air) 20 seconds
- Come with broad resistance range
- Provided with lacquer-coated thermistor disk
- Thermistors
- Resistance Temperature Device (RTD):
99 in stock
₹94 Original price was: ₹94.₹78Current price is: ₹78. (inc. GST)
- Operating voltage: +5V
- Operating Current: <15mA
- Theoretical Distance that can be measured: 2cm to 4m
- Practical Distance that can be measured: 2cm to 80cm
- Accuracy: 3mm
- Measuring angle covered: <15°
83 in stock
₹117 Original price was: ₹117.₹78Current price is: ₹78. (inc. GST)
- Supply Voltage: 5V
- Output: 3.3V TTL Logic
- Infrared Sensor with Control Circuit Board
- Adjustable Sensitivity and Holding Time
- Coverage: 120° and 7m range
- Low power consumption: 65mA
- Temperature Range: -20°C to 80°C
42 in stock
₹142 Original price was: ₹142.₹81Current price is: ₹81. (inc. GST)
4×4 Keypad Applications:
- Hobby Projects
- Security systems
- Measurement Instruments
- Vending machines
- Industrial machines
- Data entry for Embedded Systems
99 in stock
₹93 Original price was: ₹93.₹34Current price is: ₹34. (inc. GST)
Specifications
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
51 in stock
₹106 Original price was: ₹106.₹34Current price is: ₹34. (inc. GST)
Features and Specifications:
- Battery discharging stop voltage: 2.9V.
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
- Preset 4.2V charging voltage, precision ±1%.
- Max 8uA standby current.
- Integration charging management and discharging management.
53 in stock
₹22 (inc. GST)
TP4056 Module Specifications:
- Input voltage : 4.5V ~ 5.5V
- A full charge voltage: 4.2V
- Power: 4.2 w
- Charging accuracy: 1.5%
- Charging indicator: micro LED
- Input Interface: Micro USB port
- Charging method: linear charge
- Operating Temperature: -10 to +85ºC
2 in stock
₹235 (inc. GST)
Specifications
- Battery Compatibility: Designed for use with 3.7V NMC (Nickel Manganese Cobalt) lithium cells.
- Protection Features: Offers comprehensive protection, including overcharge protection, over-discharge protection, and short-circuit protection.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 10 A.
- Nickel Strip: Includes a nickel strip for easy and secure installation.
100 in stock
₹387 Original price was: ₹387.₹353Current price is: ₹353. (inc. GST)
Specifications
- Battery Compatibility: Designed for 4S LiFePO4 batteries with a nominal voltage of 12.8V.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 20 A.
- Balancing: Equipped with a balancing function to ensure all cells in the battery pack maintain the same voltage, optimizing performance and longevity.
- Safety Features: Offers overcharge protection, over-discharge protection, and short-circuit protection to safeguard the battery pack.
93 in stock
₹117 (inc. GST)
Specifications
- Working Current: 3A
- Maximum Peak Current: 6A
- Overcharge Voltage Range: 4.25-4.35V per cell
- Over-Discharge Voltage: 2.3-3.0V
- Quiescent Current: <30µA
98 in stock
Reviews
There are no reviews yet.