EGPT
I2C Serial Interface LCD Adapter Module
₹58 (inc. GST)
I2C Serial Interface LCD Adapter Module
To display data, commercially available LCD display modules like the 16×2 and 20×4 LCD displays work great with microcontrollers like the Arduino, Raspberry Pi, PIC, and others. However, a standard 16×2 LCD, even when operating in 4-bit mode, requires about 8 GPIO pins from the microcontroller, which is a lot for projects where GPIO pins are scarce. To reduce the number of pins required to drive the LCD display modules, we therefore need a serial-to-parallel data adapter. The standard 16×2 LCD display is intended to fit directly below this I2C LCD Adapter module. The LCD can then communicate with the controller via this module using the I2C protocol, which only needs two pins from the controller side. The PCF8574 IC then receives the data from I2C and uses it to display it on the LCD screen. It can power robotic projects, a 3D printer, quadcopters, and other devices.
Specifications
- 5 V power source
- LCD display with serial I2C control using PCF8574
- A jumper on the board can be used to enable or disable the LCD display’s backlight.
- LCD screen contrast can be adjusted using a potentiometer.
- 8 modules may be connected to a single I2C bus (address changes require solder jumpers).
You may also like…
Original price was: ₹235.₹117Current price is: ₹117. (inc. GST)
- Operating Voltage: 4.7V to 5.3V
- Operating Current: 1mA (without backlight)
- Can display (16×2) 32 Alphanumeric Characters
- Supports Custom Characters
- Operates in both 8-bit and 4-bit Mode
89 in stock
Related Products…
Original price was: ₹142.₹81Current price is: ₹81. (inc. GST)
4×4 Keypad Applications:
- Hobby Projects
- Security systems
- Measurement Instruments
- Vending machines
- Industrial machines
- Data entry for Embedded Systems
99 in stock
Original price was: ₹106.₹51Current price is: ₹51. (inc. GST)
Specifications
- Input Voltage Range: 3VDC to 24VDC
- Efficiency upto 93%
- Output Voltage Range: 5VDC to 26 VDC
- Inexpensive and provide high current
- Simple to adjust the output Voltage
- Maximum Output current 2A
76 in stock
₹6 (inc. GST)
Applications of Single Section 18650 Lithium Battery Support Bracket :
- Easy and Convenient to use
- Cheap and robust
- Can be easily replaced
- Improves the safety and reliability of battery pack
- Light weight brackets so does not add too much weight to the battery pack.
- Series Battery Connector for Stability
- Optimized Battery Connection Series
100 in stock
₹22 (inc. GST)
TP4056 Module Specifications:
- Input voltage : 4.5V ~ 5.5V
- A full charge voltage: 4.2V
- Power: 4.2 w
- Charging accuracy: 1.5%
- Charging indicator: micro LED
- Input Interface: Micro USB port
- Charging method: linear charge
- Operating Temperature: -10 to +85ºC
2 in stock
₹235 (inc. GST)
Specifications
- Battery Compatibility: Designed for use with 3.7V NMC (Nickel Manganese Cobalt) lithium cells.
- Protection Features: Offers comprehensive protection, including overcharge protection, over-discharge protection, and short-circuit protection.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 10 A.
- Nickel Strip: Includes a nickel strip for easy and secure installation.
100 in stock
₹9 (inc. GST)
Applications of 2 Section 18650 Battery Support Bracket :
- Simple and handy to use
- Low-cost and sturdy
- Easily replaceable
- enhances the battery pack’s dependability and safety
- Lightweight brackets prevent the battery pack from becoming excessively heavy.
- Optimized Battery Connection Series
- Series Battery Connector for Stability
95 in stock
₹294 (inc. GST)
Specifications
- Battery Configuration: Designed for 3 series-connected lithium-ion cells (3S).
- Nominal Voltage: 11.1V nominal voltage when using 3.7V NMC cells.
- Maximum Discharge Current: Capable of handling a maximum discharge current of 15 amperes.
- Nickel Strip Inclusion: Comes with a nickel strip for secure battery pack assembly.
- Protection Features: Includes overcharge and over-discharge protection to safeguard individual cells.
- Cell Balancing: Equipped with a balancing function to maintain uniform cell states of charge
49 in stock
₹46 (inc. GST)
Specifications
- Input/Trigger voltage: 5V
- Current consumption: 20mA maximum
- AC load voltage: upto 250V
- DC load voltage: upto 30V
- Load current: upto 10A
- Status Indicator LEDs
92 in stock
Original price was: ₹224.₹124Current price is: ₹124. (inc. GST)
Add to cart82 in stock
₹117 (inc. GST)
Specifications
- Working Current: 3A
- Maximum Peak Current: 6A
- Overcharge Voltage Range: 4.25-4.35V per cell
- Over-Discharge Voltage: 2.3-3.0V
- Quiescent Current: <30µA
98 in stock
₹164 (inc. GST)
Specifications
- Model : HX-4S-A01
- Size : 72mm*17mm*3mm
- Upper limit working current : 4A~6A
- Upper limit instantaneous current : 10A~13A
- Static Current : Less than 30uA
- Overcharge Voltage Range : 4.25v~4.35±0.05v
- Overdischarge voltage range : 2.3V~3.0v±0.05v
- Working temperature : -40~+60℃
99 in stock
Reviews
There are no reviews yet.