EGPT
SPDT 5V PCB Mount Relay – Sugar cube 5 pin
Specifications of 5V Relay
- Trigger Voltage (Voltage across coil) : 5V DC
- Trigger Current (Nominal current) : 70mA
- Maximum AC load current: 7A @ 250/125V AC
- Maximum DC load current: 10A @ 30/28V DC
- Compact 5-pin configuration with plastic moulding
- Operating time: 10msec Release time: 5msec
- Maximum switching: 300 operating/minute (mechanically)
Original price was: ₹90.₹18Current price is: ₹18.
This is the 5 pin wiring relay most commonly used as switching device in electronic circuits. It is mainly used in Commonly switching circuits, For Home Automation projects to switch AC loads, To Control (On/Off) Heavy loads at a pre-determined time/condition, Used in safety circuits to disconnect the load from supply in event of failure, Used in Automobiles electronics for controlling indicators glass motors.
Specifications of 5V Relay
- Trigger Voltage (Voltage across coil) : 5V DC
- Trigger Current (Nominal current) : 70mA
- Maximum AC load current: 7A @ 250/125V AC
- Maximum DC load current: 10A @ 30/28V DC
- Compact 5-pin configuration with plastic moulding
- Operating time: 10msec Release time: 5msec
- Maximum switching: 300 operating/minute (mechanically)
 Product Description
To use this relay module first you have to decide whether you want to connect or disconnect your load when relay is operated. Connect the load across Common and NC terminal if you want to disconnect the load when relay is operated or across Common and NO terminal if you want to connect the load when relay is operated. As the coil trigger voltage is 5V, you can connect it to any GPIO pin of 5V operating Arduino UNO MEGA or you can use any battery above 5V to operate the relay too.
Applications:
- Mainly used in switching circuits.
- Home Automation projects to switch AC loads
- In Controlling Heavy loads at a pre-determined time/condition
- Safety circuits to disconnect the load from supply in event of failure
- Used in Automobiles electronics for controlling indicators, glass motors etc.
Note:Â Appearance might be difference from the picture shown.
Package Contents
1× 5VDC Relay
Related Products…
Applications of Ceramic Capacitor :
Capacitance: 100000 picofarads (0.1 microfarads, 0.1uF)
Type: Ceramic capacitor
Pack: 5 pieces
Applications: Power supplies, audio equipment, electronic circuits
calculating capacitance
100 in stock
TP4056 Module Specifications:
- Input voltage : 4.5V ~ 5.5V
- A full charge voltage: 4.2V
- Power: 4.2 w
- Charging accuracy: 1.5%
- Charging indicator: micro LED
- Input Interface: Micro USB port
- Charging method: linear charge
- Operating Temperature: -10 to +85ºC
76 in stock
Applications of ceramic capacitor :
- Filter circuits like High/Low pass filter etc.
- For Filtering noise from a circuit
- Smoothing ripples in converters
- For decoupling and by pass circuits
- Fading LED circuits
- Resonant circuits.
- calculating capacitance
100 in stock
Features of MB102 Breadboard
- High-quality etched FR4 glass-epoxy circuit board
- 830 holes total
- 042 (1.07mm) holes sized for ICs or square post headers
- 1 hole spacing for DIP integrated circuits and headers
- Two power rails are provided along the board centerline
- ABS plastic material
- Light weight, easy to carry
99 in stock
Applications of 5mm LED :
- Used as indicators in products and designs
- Toys & Games
- Lighting Products
- Electronic projects
- Light Emitting Diode
- Diode Emitting Light
81 in stock
Features of 1000uF 50V Electrolytic Capacitor
- calculating capacitance: 1000uF
- Maximum Voltage: 50 Volts
- Tolerance: ±15%
- Capacitor Type: Radial Through Hole Electrolytic
- Polarization: Yes. Line with ‘-‘ denotes negative lead
- Max Temperature: +85°C
100 in stock
Specifications for this 10K Trimpot:
- Material used: Metal
- Value: 0-10K
83 in stock
Applications:
- Used in filter circuits like High/Low pass filter etc.
- Used in Resonant Circuits / capacitor
- To remove noise from a circuit
- Used in DC-DC converters and Power supply circuits
- To Smoothen ripples in converters
- Fading LED circuits
- calculating capacitance
- electrolytic capacitor
90 in stock
BC547 Applications
- Driver Modules like Relay Driver, LED driver etc..
- Amplifier modules like Audio amplifiers, signal Amplifier etc..
- Darlington pair
87 in stock
Specifications
- Small signal N-Channel MOSFET
- Continuous Drain Current (ID) is 49A at 25°C
- Pulsed Drain Current (ID-peak) is 160A
- Minimum Gate threshold voltage (VGS-th) is 2V
- Maximum Gate threshold voltage (VGS-th) is 4V
- Gate-Source Voltage is (VGS) is ±20V (max)
- Maximum Drain-Source Voltage (VDS) is 55V
- Available in To-220 package
98 in stock
Applications of NTC Thermistor:
- Resistance at 25 degrees C: 10K +- 1%
- B-value (material constant) = 3950+- 1%
- Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air) approx.7.5mW/K
- Thermal cooling time constant <= (in air) 20 seconds
- Come with broad resistance range
- Provided with lacquer-coated thermistor disk
- Thermistors
- Resistance Temperature Device (RTD):
99 in stock
Specifications
- Design: Miniature prototyping board for space-efficient projects
- Usage: Solderless breadboard for hassle-free circuit building
- Points: 400 points for creating and testing circuits
- Versatility: Suitable for both beginners and experienced electronics enthusiasts
- Organization: Keep your projects tidy with this efficient solderless solution
17 in stock
Reviews
There are no reviews yet.