EGPT
I2C Serial Interface LCD Adapter Module
₹58 (inc. GST)
I2C Serial Interface LCD Adapter Module
To display data, commercially available LCD display modules like the 16×2 and 20×4 LCD displays work great with microcontrollers like the Arduino, Raspberry Pi, PIC, and others. However, a standard 16×2 LCD, even when operating in 4-bit mode, requires about 8 GPIO pins from the microcontroller, which is a lot for projects where GPIO pins are scarce. To reduce the number of pins required to drive the LCD display modules, we therefore need a serial-to-parallel data adapter. The standard 16×2 LCD display is intended to fit directly below this I2C LCD Adapter module. The LCD can then communicate with the controller via this module using the I2C protocol, which only needs two pins from the controller side. The PCF8574 IC then receives the data from I2C and uses it to display it on the LCD screen. It can power robotic projects, a 3D printer, quadcopters, and other devices.
Specifications
- 5 V power source
- LCD display with serial I2C control using PCF8574
- A jumper on the board can be used to enable or disable the LCD display’s backlight.
- LCD screen contrast can be adjusted using a potentiometer.
- 8 modules may be connected to a single I2C bus (address changes require solder jumpers).
You may also like…
Original price was: ₹235.₹117Current price is: ₹117. (inc. GST)
- Operating Voltage: 4.7V to 5.3V
- Operating Current: 1mA (without backlight)
- Can display (16×2) 32 Alphanumeric Characters
- Supports Custom Characters
- Operates in both 8-bit and 4-bit Mode
89 in stock
Related Products…
Original price was: ₹340.₹306Current price is: ₹306. (inc. GST)
Specifications
- Robust & High Accuracy: Ensures reliable performance
- Board Size: 23mm*40mm – Compact and space-efficient
- Compatible with 3.3V-5V Interface: Works seamlessly with different boards
- Compatible with All Versions of Arduino: Versatile integration
- EEPROM for Configuration Settings: Stores settings for convenience
- Separated 18X18mm GPS Antenna: Enhanced signal reception
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN): Augmented precision
- Maximum Navigation Update Rate: 5Hz – Swift and real-time updates
- Default Baud Rate: 9600bps – Standard communication speed
- EEPROM with Battery Backup: Preserves configurations
- Sensitivity: -160dBm – Reliable signal reception
- Supply Voltage: 3.6V – Compatible with various power sources
- Operating Temperature Range: -40ºC to 85°C – Suitable for diverse environments
20 in stock
₹6 (inc. GST)
Applications of Single Section 18650 Lithium Battery Support Bracket :
- Easy and Convenient to use
- Cheap and robust
- Can be easily replaced
- Improves the safety and reliability of battery pack
- Light weight brackets so does not add too much weight to the battery pack.
- Series Battery Connector for Stability
- Optimized Battery Connection Series
100 in stock
Original price was: ₹260.₹235Current price is: ₹235. (inc. GST)
Specifications
- Battery Pack Output 12.8V (4S Type)
- This BMS only Used For LifePO4, not For Lithium-Ion Batteries
- Deep Discharge & Over Charging Protection
- Battery Capacity- 10A
- Voltage 12.8v
- Size Prismatic
- Battery Type-Lithium Iron Phosphate
- Usage/Application-Solar Light
- Current 10 Amp
74 in stock
₹117 (inc. GST)
Specifications
- Working Current: 3A
- Maximum Peak Current: 6A
- Overcharge Voltage Range: 4.25-4.35V per cell
- Over-Discharge Voltage: 2.3-3.0V
- Quiescent Current: <30µA
98 in stock
Original price was: ₹93.₹34Current price is: ₹34. (inc. GST)
Specifications
- 5VDC Operating voltage
- I/O pins are 5V and 3.3V compliant
- Built-in Ambient Light Sensor
- 20mA supply current
- Mounting hole
- Adjustable Range Detection
- LED Indicators
51 in stock
Original price was: ₹387.₹353Current price is: ₹353. (inc. GST)
Specifications
- Battery Compatibility: Designed for 4S LiFePO4 batteries with a nominal voltage of 12.8V.
- Continuous Discharge Current: Capable of handling a continuous discharge current of 20 A.
- Balancing: Equipped with a balancing function to ensure all cells in the battery pack maintain the same voltage, optimizing performance and longevity.
- Safety Features: Offers overcharge protection, over-discharge protection, and short-circuit protection to safeguard the battery pack.
93 in stock
Original price was: ₹224.₹124Current price is: ₹124. (inc. GST)
Add to cart82 in stock
₹9 (inc. GST)
Applications of 2 Section 18650 Battery Support Bracket :
- Simple and handy to use
- Low-cost and sturdy
- Easily replaceable
- enhances the battery pack’s dependability and safety
- Lightweight brackets prevent the battery pack from becoming excessively heavy.
- Optimized Battery Connection Series
- Series Battery Connector for Stability
95 in stock
Original price was: ₹142.₹81Current price is: ₹81. (inc. GST)
4×4 Keypad Applications:
- Hobby Projects
- Security systems
- Measurement Instruments
- Vending machines
- Industrial machines
- Data entry for Embedded Systems
99 in stock
₹165 (inc. GST)
Features:
– Power-Supply: 12V DC.
– Sensor Cable Length: 0.5 meters.
– LED Indicator: Illustrates the current relay state.
– Compact Size: 48mm x 40mm x 14mm in dimension and have a weight of 20g.
– Relay Capacity: The transformer can handle 240V AC, 5A or 14V DC, 10A.
50 in stock
Reviews
There are no reviews yet.