EGPT
SPDT 5V PCB Mount Relay – Sugar cube 5 pin
Specifications of 5V Relay
- Trigger Voltage (Voltage across coil) : 5V DC
- Trigger Current (Nominal current) : 70mA
- Maximum AC load current: 7A @ 250/125V AC
- Maximum DC load current: 10A @ 30/28V DC
- Compact 5-pin configuration with plastic moulding
- Operating time: 10msec Release time: 5msec
- Maximum switching: 300 operating/minute (mechanically)
Original price was: ₹90.₹18Current price is: ₹18.
This is the 5 pin wiring relay most commonly used as switching device in electronic circuits. It is mainly used in Commonly switching circuits, For Home Automation projects to switch AC loads, To Control (On/Off) Heavy loads at a pre-determined time/condition, Used in safety circuits to disconnect the load from supply in event of failure, Used in Automobiles electronics for controlling indicators glass motors.
Specifications of 5V Relay
- Trigger Voltage (Voltage across coil) : 5V DC
- Trigger Current (Nominal current) : 70mA
- Maximum AC load current: 7A @ 250/125V AC
- Maximum DC load current: 10A @ 30/28V DC
- Compact 5-pin configuration with plastic moulding
- Operating time: 10msec Release time: 5msec
- Maximum switching: 300 operating/minute (mechanically)
 Product Description
To use this relay module first you have to decide whether you want to connect or disconnect your load when relay is operated. Connect the load across Common and NC terminal if you want to disconnect the load when relay is operated or across Common and NO terminal if you want to connect the load when relay is operated. As the coil trigger voltage is 5V, you can connect it to any GPIO pin of 5V operating Arduino UNO MEGA or you can use any battery above 5V to operate the relay too.
Applications:
- Mainly used in switching circuits.
- Home Automation projects to switch AC loads
- In Controlling Heavy loads at a pre-determined time/condition
- Safety circuits to disconnect the load from supply in event of failure
- Used in Automobiles electronics for controlling indicators, glass motors etc.
Note:Â Appearance might be difference from the picture shown.
Package Contents
1× 5VDC Relay
Related Products…
Applications of NTC Thermistor:
- Resistance at 25 degrees C: 10K +- 1%
- B-value (material constant) = 3950+- 1%
- Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air) approx.7.5mW/K
- Thermal cooling time constant <= (in air) 20 seconds
- Come with broad resistance range
- Provided with lacquer-coated thermistor disk
- Thermistors
- Resistance Temperature Device (RTD):
99 in stock
- Output voltage: 5v
- Dropout voltage (Max): 2.5v @ 1A
- Output Current: 1.5 A
- Load regulation: 100 mv
93 in stock
Features of 1000uF 50V Electrolytic Capacitor
- calculating capacitance: 1000uF
- Maximum Voltage: 50 Volts
- Tolerance: ±15%
- Capacitor Type: Radial Through Hole Electrolytic
- Polarization: Yes. Line with ‘-‘ denotes negative lead
- Max Temperature: +85°C
100 in stock
Applications of 1 Watt White Power LED-Light Emitting Diode :
- Operating Voltage range: 3.0 V to 3.5 V
- Current through LED: 300mA to 350mA
- Maximum reverse voltage between ANODE and CATHODE: 5 V
- Maximum Power dissipation: 1Watt
- Operating temperature: – 40 ºC to +80 ºC
- Color: White
- Item Shape:Â round
- material Type:Â Fluoro-silicon
- Diode Emitting Light
68 in stock
Features of MB102 Breadboard
- High-quality etched FR4 glass-epoxy circuit board
- 830 holes total
- 042 (1.07mm) holes sized for ICs or square post headers
- 1 hole spacing for DIP integrated circuits and headers
- Two power rails are provided along the board centerline
- ABS plastic material
- Light weight, easy to carry
99 in stock
Applications of 5mm LDR :
- Disc Diameter: 5mm
- Light Resistance: 5-10k Ohm
- Dark resistance: upto 500k Ohm
- Maximum Operating Temperature: +800 degree Celsius
- Type of Mounting: Through Hole(PTH)
- Light Dependent Resistor
- Light Detecting Resistor
68 in stock
Applications of ceramic capacitor :
- Filter circuits like High/Low pass filter etc.
- For Filtering noise from a circuit
- Smoothing ripples in converters
- For decoupling and by pass circuits
- Fading LED circuits
- Resonant circuits.
- calculating capacitance
100 in stock
Specifications
- Forward Voltage: 2.85V
- Size: 5mm
- Color: Blue
- Diode Emitting Light
- LED
91 in stock
- Capacitance: 10uF
- Maximum Voltage: 50 Volts
- Tolerance: ??15%
- Capacitor Type: Radial Through Hole Electrolytic
- Polarization: Yes. Line with ???-??? denotes negative lead
- Max Temperature: +85??C
100 in stock
- Forward Voltage Drop: 1V (at 3A)
- Forward current: 3A
- Peak Forward Current: 200A
- Reverse Voltage: 1000V
- Available in DO-201 Package
90 in stock
Specifications
- Design: Miniature prototyping board for space-efficient projects
- Usage: Solderless breadboard for hassle-free circuit building
- Points: 400 points for creating and testing circuits
- Versatility: Suitable for both beginners and experienced electronics enthusiasts
- Organization: Keep your projects tidy with this efficient solderless solution
17 in stock
Applications of 100K ohm, 1/4 Watt Resistor :
- Highly Reliable 100K ohm Resistor
- ±5% Tolerance
- Power Rating: 0.25W
- Package: Axial
- Mounting Feature: Through-hole
- Composition: Carbon Film Type
- Excellent Heat and Humidity Withstand Performance
- Long Life
- Automatically insertable
- Resistance
- Ohm Rating
97 in stock
Reviews
There are no reviews yet.